Sure, Katrina and I can go heads up on Chili. Eric Woodall <eric@xxxxxxxxxxxxxx> wrote: LOL So, are we going to have an Iron Chef Off at the Bulli Gras? We could get Denis to 5 finger discount some Truffles... > But according to Denis, It's Intake Leek. > > Eric Woodall wrote: Can you say, I'm being a bigger > smarta****? > ;-O > >> Can you say, I'm being a smarta****. >> >> Eric Woodall wrote: How could there not be? >> Can you say, Intake Leak? >> >> Mark Sawyer wrote: >>> There's suppose to be a gasket under the carb? Hmmmm. >>> >>> */Dan Martin /* wrote: >>> >>> I had it bolted down so tight that the gasket was plugging the by >>> pass on the bottom flange. >>> Colin flipped the gasket over and torqued the carb down to spec and >>> all is well. >>> >>> On Jan 12, 2007, at 10:46 AM, Eric Woodall wrote: >>> >>> > You might ask Dan Martin about the idle issue. >>> > He has having problems also, and at Transporters At the Point he >>> > had Colin >>> > fix his. Had something going on on the right side of the carb? >>> > >>> > >>> > >>> >> The last good carb we had went on Mark J.'s bus. we were having >>> >> the same >>> >> problem with not wanting to idle. had nothing to do with the >>> >> dizzy. it was >>> >> all carb problems. I have a rebuild kit in the garage for a PICT >>> >> 34 if you >>> >> want to clean and rebuild it. >>> >> >>> >> Trey Jung wrote: Ok, bus has been running ok >>> >> these >>> >> last few weeks but yesterday driving home the bus stopped wanting >>> >> to idle. >>> >> >>> >> Symptoms: Coming up to a red light or stop sign as I am braking >>> >> the oil >>> >> light flicks in and off , oil pressure is dropping down to 0 in >>> >> relationship to the the tach dropping to zero (bus dies) have to >>> >> keep >>> >> foot on gas pedal to try and keep the idle at 1100 or 1200.... not >>> >> good. >>> >> >>> >> I pulled the Pict 34 and blew out the jets and gas.. remounted it. >>> >> Fuel >>> >> filter looks good, replaced it 2 months ago when i had the same >>> >> problem..... >>> >> >>> >> the common denominator here is like 2 months ago the dizzy was >>> >> loose (the >>> >> clamp came loose back then and I thought hey its just the dizzy >>> >> moved) I >>> >> bought a new "made in china" clamp from Kermit and it came >>> loose too >>> >> yesterday , tighten it down and the bolt snapped, might have to >>> >> buy one of >>> >> those nice aluminum blue ones for $30 clams... >>> >> >>> >> Anyone I reset the dizzy in the engine last night and it still >>> >> wont idle >>> >> (no clamp to hold it down) but the dizzy doesn't pop out like >>> >> you'd think >>> >> it would (the chatter spring is in there) >>> >> >>> >> so if anyone in Houston has a pict 34 i can borrow and throw on >>> >> the engine >>> >> to test this weekend that would be great... >>> >> >>> >> Trey >>> >> >>> >> 713-501-7963 >>> >> >>> >> >>> > >>> > >>> > >>> >>> >>> >> >> >> >> >> > > > > >