[tcb] Re: #4
- From: sammie smith <bugcollections@xxxxxxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Sat, 8 Jun 2013 12:11:12 -0700 (PDT)
Not if it's only the screw. You do not have to remove the rocker shaft just to
replace the adjusting screw. It's an easy job, just screw in a new one.
________________________________
From: Mike <mike@xxxxxxxxxxxxxxx>
To: tcb@xxxxxxxxxxxxx
Sent: Sat, June 8, 2013 12:36:15 PM
Subject: [tcb] Re: #4
Is it the adjustment screw or the rocker arm itself that's stripped? If it's
the screw you can replace just the screw. If it's the rocker arm your gonna
have to replace the rocker. I think either way the rocker arm assy/shaft has
to come off to accomplish this.
Good luck.
On 6/8/2013 12:14 PM, Cari Smith wrote:
> Intake adjustment screw on#4 is totally stripped. Any ideas?
> Cari and Paul
Other related posts:
