[tcb] Re: 12 hours
- From: Eric Woodall <ericthomaswoodall@xxxxxxx>
- To: "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx>
- Date: Tue, 18 Jun 2013 16:25:31 -0500
That's what I always use for the door hinges. Greatest invention ever!
On Jun 18, 2013, at 4:17 PM, Biggestdaddyo <biggestdaddyo@xxxxxxxxx> wrote:
> If those hinges are held in by giant phillips head fasteners, then there's a
> special manual impact driver that I have for those. I bought it at SEARS.
> You get the right size bit, put it in place and twist as if to unscrew the
> bolt. Then whack the end with a big a$$ hammer. It takes a few whacks, but
> it'll finally give way. I use all the techniques already mentioned to help
> like heat, PB Blaster, 50/50 acetone and ATF, never heard of the crayon - but
> I'm gonna try that too!. This tool is great for door hinges etc. too
>
> http://www.sears.com/craftsman-impact-driver/p-00947641000P?prdNo=1&blockNo=1&blockType=G1
>
> From: Julie <julie.hey.ho.lets.go@xxxxxxxxx>
> To: "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx>
> Sent: Tuesday, June 18, 2013 9:41 AM
> Subject: [tcb] Re: 12 hours
>
> Cool. Thanks for the replies and support!
>
> On Jun 18, 2013, at 8:13 AM, theresabuckner@xxxxxxx wrote:
>
>> Julie that mixture 50/50 is great . have used on carb butterflys . it saved
>> the carb be careful it is not good on paint
>> terry
>>
>> -----Original Message-----
>> From: Julie <julie.hey.ho.lets.go@xxxxxxxxx>
>> To: tcb <tcb@xxxxxxxxxxxxx>
>> Sent: Mon, Jun 17, 2013 10:57 pm
>> Subject: [tcb] 12 hours
>>
>> I have been working on Sonne for 12 hours straight today. Well sort of
>> straight. I did stop for food and to cool in front of the fan every now and
>> again. Some grinding. Lots of sanding on the rusty window sills and the
>> drip
>> rail.
>>
>> My hinges for my pop outs are poorly. One moves enough but it seems
>> impossible
>> to get the screws out so I can take it off the hinge to rebuild the window.
>> And
>> the other hinge has the window off but won't budge. I have sprayed it many
>> times over many hours with PB Blaster and I removed as much rust from it as
>> I
>> could. It still won't budge. Isn't there some home made remedies that work
>> better than PB Blaster?
>>
>> I will leave a big ring around the bathtub tonight for sure.
>
>
Other related posts:
