Hello Ben,
I’ve been having this problem with my Tango 2. A little contact fluid (inserted
with the cap of the button removed) has helped a bit, but I usually ended up
reassigning the command to a less problematic command (for example a tool
selection rather than a “toggle” switch like play/stop). Certainly, the worst
has been to have a problematic button with a delete command assigned, because I
was sometimes deleting 2 audio clips rather than only the one I wanted to
delete in the first place.
If anyone found a better solution I’m interested !
Jerome
Jérôme Heiderscheidt
Studio Ubik
Audiovisual production // Sound recording studio
Boulevard Barthélémy, 11
1000 Brussels
Tel: +32 (0) 2 5029795
Mob: +32 (0) 497 825804
www.studio-ubik.com
facebook.com/studio.ubik
vimeo.com/studioubik
On 17 Dec 2019, at 17:32, Benjamin Sheen <ben@xxxxxxxxxxx> wrote:
Has anyone experienced Tango 2 buttons chattering/registering double
commands? E.g. a key assigned to play/stop will occasionally register both
play and stop in one press, or one assigned to ’next fade’ will move on 2
fades.
I am starting to find this with well used buttons and wonder if anyone has
had any success in troubleshooting it.
Thanks in advance for any advice,
Ben
Benjamin Sheen
Label & Media Manager
King's College, Cambridge CB2 1ST
www.kings.cam.ac.uk <http://www.kings.cam.ac.uk/>
www.kingscollegerecordings.com <http://www.kingscollegerecordings.com/>