Jan,
do you have a extension bay connected?
I've had to go into windows system on the Tango and readjust the window
configuration back to "TangoDisplaySchemes" with the similar problem your having
If you need more help on that let me know
Tony
Tony Gort
Audio Post Production Services
www.tonygort.com
Los Angeles (310) 929-7274
Tokyo (81) 050 5532 7871
Vancouver 778 870 1245
On 2016-09-16, at 10:55 AM, Jan Willems <jwillems5@xxxxxxxxx> wrote:
Thank you for the tips Karol Kutlik!
Jan
On Fri, Sep 16, 2016 at 7:38 PM, Karol Kutlik <dmarc-noreply@xxxxxxxxxxxxx>
wrote:
Hi Jan,
I had the the same problem. It help if you clean the dirts on the border
under the frame with press air. It's enough if you use can with air pressure.
Hope this help you.
Cheers
Karol
Odoslané z iPhonu
Dňa 16. 9. 2016, o 17:29, Jan Willems <jwillems5@xxxxxxxxx> napísal:
Thanks Ludger Mias!
I have learned now that you first have to run the Netsmart installer, and
this installs the Logic Control bundle (this is the SmartAV control surface
plugin that makes the communication between Logic and the Tango) in the
Library (Macintosh HD//Library/Application Support/MIDI Device Plug-ins)..
Also you have to have read and write permissions of the MIDI Device Plug-ins
folder, if not then logic will not see the plugin in the control surface
setup window..
Also important is to run the Netsmart and Consolesoftware in sets.. so if
you install Netsmart 3.0 then you go with Consolesoft 3.0
Do not mix them as this can give bugs in ly experience
Now i have another problem:
the far right part of the Tango touchscreen is unresponsive..
You can see in the attached screenshot what i mean: the cursor is at the
border where i can touch..more to the right the screen is unresponsive, to
the left everything is fine.. I don't know how to fix this..anybody has
experience with this?
On Fri, Sep 16, 2016 at 4:41 PM, Ludger Mias <mias.l@xxxxxx> wrote:
Hi Jan,
enclosed find 2 files. Hope they will help you.
Best wishes, Ludger
Am 15.09.2016 um 23:56 schrieb Jan Willems <jwillems5@xxxxxxxxx>:
Hello All,
I have a Smart AV Tango 1 that i used for 3 years with Logic 9 on Snow
Leopard..
Now i have upgraded my computer to El Capitan with Logic X and i am trying
to get the Tango to work again!
I need to install the Smart AV Logic module (in Logic's control surfaces
setup window).
When i go to 'logic-preferences-control surfaces-setup-new-install' i
remember that the Smart AV control surface plugin was there when i did it
when i was in Snow Leopard, but now it's no more in the list (in both
logic 9 and logic X)..so i think a have to install this file manually..
I tried to go to the SmartAV website, but it's gone.. I have backups for
the consolesoftware and firmware and netsmart, so that's fine.. I am
looking only for the control surface plugin (the Smart AV Logic control
surface module) so i can install it for Logic 9 and logic X.
Also when i google it i can't seem to find anything..
I attached some screenshots to make it clear..
Can somebody help me with this?
Many thanks,
Jan Willems
<about control surface plugins.png><smart console control surface
plugin.png><smartAV support logic 9.png><smartAV support logic X.png>
<IMG_6057.JPG>
