Hi Jim To expand slightly on what Steve has correctly suggested, if you go to forward a message, you do hit the joystick in the centre on the "to" field. This brings up your contacts list, but TALKS doesn't say they are there, merely "ok". At this point, you do arrow through them and then select which one you want. Then cursor down to the body of the message you are forwarding and then hit your send. TALKS has never notified the user that the contacts list has come up if you press the joystick in the centre on the "to" field. But your contacts are there when it says "ok". I hope that kind of makes sense. Jackie Cairns Braille Support Adviser Email: Jackie.Cairns@xxxxxxxxxxxxxxxxxxx Sight and Sound Technology Ltd Welton House North Wing Summerhouse Road Moulton Park Northampton NN3 6WD Telephone: 0845 6347979 or Telephone: 01604 798070 Fax: 01604 798090 Web: www.sightandsound.co.uk -----Original Message----- From: talks-uk-bounce@xxxxxxxxxxxxx [mailto:talks-uk-bounce@xxxxxxxxxxxxx] On Behalf Of jim mcauslan Sent: 22 September 2008 19:06 To: talks list Subject: [talks-uk] forwarding messages Hi List, I tried to forward a message to a friend but in the "to" box, instead of wanting a name, I had to enter the full mobile number. I had a thorough look in the menus etc, but couldn't find a clue. Can I change this setting? Jim McAuslan from sunny Findhorn ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________