[talks-uk] Cell identification
- From: <tim.pennick@xxxxxx>
- To: <talks-uk@xxxxxxxxxxxxx>
- Date: Tue, 22 Jun 2010 09:23:54 +0100
Hi All,
I used to have a Nokia 3230 (I think) with Talks 2. When I'd had the phone for
a couple of years, I discovered a setting which put the identification for the
local cell on the opening window. This meant that the STD code for the local
exchange was always available on the stand-by screen. I can't remember for the
life of me how I set this up, and can't find an equivalent setting on the N85 I
have now. Can anyone help, as this was very useful, apart from anything else,
when you're on a train it can give you a good idea of where you've got to.
Also, on a related subject, can anyone tell me how much information I can get
from the GPS that comes with the N85? I'm using Talks4 though could be
persuaded to upgrade. I don't want to spend lots of money downloading maps if
I can't get anything out of the GPS system.
Thanks for any info,
Tim Pennick
Tim Pennick
Senior Researcher
BT Innovate & Design
_________________________
Office: +44 (0) 1473 642797
Email: tim.pennick@xxxxxx <mailto:sian.evans@xxxxxx>
This email contains BT information, which may be privileged or confidential.
It's meant only for the individual(s) or entity named above. If you're not the
intended recipient, note that disclosing, copying, distributing or using this
information is prohibited. If you've received this email in error, please let
me know immediately on the email address above. Thank you. We monitor our email
system, and may record your emails.
British Telecommunications plc
Registered office: 81 Newgate Street London EC1A 7AJ
Registered in England no: 1800000
Other related posts:
