[tabi] instructions for JAWS users for TeamTalk

  • From: "Allison and Chip Orange" <acorange@xxxxxxxxxxx>
  • To: <tabi@xxxxxxxxxxxxx>
  • Date: Fri, 8 Jan 2010 19:00:38 -0500

Hi all,

below are some instructions that a jaws user will need to do one time, so
that you aren't annoyed by it repeating a percentage from one of the
controls on the TeamTalk window:

When you are in the Team Talk window, press insert f2 to bring up the jaws
Then, arrow down to the configuration manager and press enter. Jaws will say
talk 4.0.jcf configuration manager". At this point, press alt, then right
arrow to
set options and then up arrow once to user options. Then, press enter. The
choice is the one you want, which is announce progress updates. Press the up
until you come to off, followed by enter. Then, press control s to save the
and alt f4 to exit the manager. Note that this change will only affect Team
and not any other applications as long as you are in the Team Talk window
when you
initiate the configuration manager.


Check out the TABI resource web page at http://acorange.home.comcast.net/TABI
and please make suggestions for new material.

if you'd like to unsubscribe you can do so through the freelists.org web 
interface, or by sending an email to the address tabi-request@xxxxxxxxxxxxx 
with the word "unsubscribe" in the subject.

Other related posts:

  • » [tabi] instructions for JAWS users for TeamTalk - Allison and Chip Orange