[sugpro] Re: xylitol

From: "chuck" <chuckw@xxxxxxxxxxxx>
To: <sugpro@xxxxxxxxxxxxx>
Date: Thu, 14 Sep 2017 11:03:35 -0500

Yes but I have been instructed by Richard if you’re going to use his excel
sheet for calculations that you should use sorbitol but use “coarse” selection,
you can get a TON of performance data from this spreadsheet and also Nozzle
config dimensions.

Here is the title for the spreadsheet on Richards page (thanks Richard!!)

SRM 2014.XLS

Solid Rocket Motor Performance

-----Original Message-----
From: sugpro-bounce@xxxxxxxxxxxxx [mailto:sugpro-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Nikolai Nielsen
Sent: Thursday, September 14, 2017 10:56 AM
To: sugpro@xxxxxxxxxxxxx
Subject: [sugpro] Re: xylitol

ok thanks. so i can just use sorbitol in the motorsim because it is listed as
one of the fuels.

Nikolai Nielsen

On Thu, Sep 14, 2017 at 5:53 PM, chuck <chuckw@xxxxxxxxxxxx> wrote:

I have been using Xylitol with good results, it behaves similarly to Sorbitol
and you can reference Richard Nakkas webpage for TONS of info on Sorbitol. If
you look at the chemical structure they are VERY similar, and they act very
similar.

-----Original Message-----
From: sugpro-bounce@xxxxxxxxxxxxx [mailto:sugpro-bounce@ ;
<mailto:sugpro-bounce@xxxxxxxxxxxxx> freelists.org] On Behalf Of Nikolai Nielsen
Sent: Thursday, September 14, 2017 10:38 AM
To: sugpro@xxxxxxxxxxxxx
Subject: [sugpro] xylitol

iv got a bag of xylitol but it burns too slowly for my motors as you could see
on my rocket launch video where it didn't take off(was probably some other
reason but it played a role) and i want to be able to us it because it isn't
cheap and its just sitting on my shelf. does anyone have the necessary data
that i could put into the motor sim propellant editor section so that i can add
it to the selection?

Nikolai Nielsen

References:
- [sugpro] Re: xylitol
  - From: Nikolai Nielsen

[sugpro] Re: xylitol

Other related posts: