Going from a simple flat washer to a properly expanded divergent cone will
improve performance over 40%.
--------------------------------------------
On Mon, 3/19/18, Sunny Gavali-Bhosale <sunnygavali02@xxxxxxxxx> wrote:
Subject: [sugpro]
To: sugpro@xxxxxxxxxxxxx
Date: Monday, March 19, 2018, 7:55 AM
Does length of nozzle matter in
PVC motors? Like exhaust flame and smoke, overall motor
performance etc..In my all past motors, i have used
30mm of length of convergence side(washer to upper end of
nozzle) and convergence cone was 40° to 60° in between.
Divergence was same as suggested by Chuck Knight's PVC
motors.Here's is the last success but longer
burn of the motor.https://youtu.be/Ppq_LfDHDAo