Of course. we will make the corresponding report. > Date: Fri, 20 Jun 2014 20:08:46 -0400 > From: shawn.mchatten@xxxxxxxxxxx > To: sugarshot@xxxxxxxxxxxxx > Subject: [SS2S-Main] Re: temperature controller with arduino > > Share it on the new sugar pro list. > > On 2014-06-20 19:57, Cliff Bates wrote: > > This sounds like something very practical to have around. If you care > > to share the design when completed, I imagine it'd go over quite well > > among the group. > > > > Cliff Bates > > ----- Original Message ----- > > FROM: Vicente Alvero Zambrano > > TO: sugarshot@xxxxxxxxxxxxx > > SENT: Friday, June 20, 2014 4:01 PM > > SUBJECT: [SS2S-Main] Re: temperature controller with arduino > > > > Florin that's perfect. > > The system must be simple (as cheap as possible). With a source of > > heating (resistance) and several computer fans to circulate the air. > > Arduino must be able to control the temperature (using the resistance > > and the fan) according to a predefined schedule. A program is for > > example: > > 20 ° C to 100 ° C by increments of 20 ° C / h. > > 5 hours at 100 ° C. > > 100 ° C at 20 ° C with a decrease of 20 ° C. > > Ideally develop a graphical interface to vary these parameters at > > will. > > > > ------------------------- > > Date: Sat, 21 Jun 2014 01:32:37 +0300 > > Subject: [SS2S-Main] Re: temperature controller with arduino > > From: florin.mingireanu82@xxxxxxxxx > > To: sugarshot@xxxxxxxxxxxxx > > > > I can help with the temperature controller but I would need more > > precise specifications: like temperature range, control "band" etc. > > > > On Fri, Jun 20, 2014 at 10:16 PM, Vicente Alvero Zambrano > > <vicente_alvero_14@xxxxxxxxxxx> wrote: > > > > Hi, > > > > Anyone know how to make a temperature controller with arduino to make > > a home oven to cure composite? > > The idea is to monitor several computer fans and thermal resistances. > > Must be able to follow a cure profile and decreased with increases in > > temperature curing. > > Any volunteer? > > > > Cheers > > Vicente Alvero > > > > -- > > Florin Mingireanu > > Romanian Space Agency > > Str. Mendeleev 21-25, et. 5, sector 1, 010362 Bucuresti, ROMANIA > > office tel. +40-21-316.87.22; +40-21-316.87.23; > > cell: +40-757-768971 (primary phone) > > fax +40-21-312.88.04 > > florin.mingireanu@xxxxxxx > > http://www.rosa.ro [1] > > > > Links: > > ------ > > [1] http://www.rosa.ro >