Thanks Mattias, Sure, we need someone with knowledge on fluid dynamics and can do the simulation > El 31/07/2014, a las 11:13, "Lampe, Mattias SLC CT PEK" > <mattias.lampe@xxxxxxxxxxx> escribió: > > Hi Vicente, > > as far as I know, there is some Open Source Software that could possibly > perform this kind of simulations (e.g. OpenFOAM), but it takes quite a bit of > expert knowledge (on fluid dynamics AND on numerical simulation methods) to > get any meaningful results out of such software. > > A fast PC would probably be sufficient for the number crunching, so what you > really need is someone with a solid background in fluid dynamics and > practical simulation experience. > > Mattias > > From: sugarshot-bounce@xxxxxxxxxxxxx [mailto:sugarshot-bounce@xxxxxxxxxxxxx] > On Behalf Of Vicente Alvero Zambrano > Sent: Thursday, July 31, 2014 4:57 PM > To: sugarshot@xxxxxxxxxxxxx > Subject: [SS2S-Main] Re: Cfd simulation > > That is perfect. Can you do it? If you want, I can give you technical > drawings and data information to the simulation. What do you think? > > El 30/07/2014, a las 22:01, "Nathan Asdourian" <rawliquid@xxxxxxxxx> escribió: > > I likely have sufficient computing power, unless it requires a server farm. > I also know enough about computers to likely get whatever software is needed > running, but I certainly don't know enough to do it, nor do I have the > software. If anyone has those two things but lacks the resources to do it, > let me know and I can get you access to my system. > > > On Wed, Jul 30, 2014 at 12:10 PM, Vicente Alvero Zambrano > <vicente_alvero_14@xxxxxxxxxxx> wrote: > Yes, two things. We need a complete simulation. > > El 30/07/2014, a las 19:23, "Nathan Asdourian" <rawliquid@xxxxxxxxx> escribió: > > I assume this means you are looking for someone that knows how to do it > rather than just computing resources? > > > > -- > I respectfully decline the invitation to join your hallucination.