Hello all who offered help,
Sam, I tried cleaning the USB C connector with Freon to no avail, can't see
how this would help, but gave it a try. The loud speaker works , and the
Bluetooth option is workable, but Bluetooth is suspect at the best of times.
Dennis and Stephen, I suspected that no sound level information was sent
with the signal, and hag initially told the people at the other end to turn
up the volume on their phones.
I have now put the sim card back into my old i-phone 5 as I need something
reliable. There are just too many faults in the Smart Vision for me to waste
more time or money.
Geoff
From: smartvisionau-bounce@xxxxxxxxxxxxx
[mailto:smartvisionau-bounce@xxxxxxxxxxxxx] On Behalf Of Dennis Long
Sent: Saturday, 9 May 2020 10:58 AM
To: smartvisionau@xxxxxxxxxxxxx
Subject: [smartvisionau] Re: No one can hear me.
I agree with Stephen. I suspect it will have to be repaired however more
testing is needed. Try what Stephen advised
From: smartvisionau-bounce@xxxxxxxxxxxxx
<smartvisionau-bounce@xxxxxxxxxxxxx> On Behalf Of Stephen Giggar
Sent: Thursday, May 7, 2020 8:51 PM
To: smartvisionau@xxxxxxxxxxxxx
Subject: [smartvisionau] Re: No one can hear me.
You cannot do that. I would say try using the wired headset that came with
the SmartVision2 and see if the problem continues. Also try a Bluetooth
headset and see if the problem continues. If the problem doesn't continue
with either one of the above two options! Then you need to send you're not
so SmartVision2 in for repair.
Signed: Stephen Giggar
Hardware eventually fails, software eventually works.
No amount of bandwidth can fix poor design.
From: smartvisionau-bounce@xxxxxxxxxxxxx
[mailto:smartvisionau-bounce@xxxxxxxxxxxxx] On Behalf Of Geoff & Fiona Kelly
Sent: Thursday, May 07, 2020 4:40 PM
To: smartvisionau@xxxxxxxxxxxxx
Subject: [smartvisionau] No one can hear me.
Hello all,
My not so Smart Vision 2 has a new problem. When I call someone, or am
called, they cannot hear me. This problem has been getting worse for a few
days now, and is at the point of making the call useless.
How do I ajust the "send" volume, if such a thing is possible?
Thanks
Geoff
