For now I am attaching installer file from just vm installed slint.
Pawel
On 6/2/23, Didier Spaier <didier@xxxxxxxx> wrote:
Hi,
comparing the alsa-info output in Devuan and Slint installers did not give
me
much clues.
The kernel version and alsa software are more recent in Slint but I fail to
see
how this come into play.
Also, in pawel-devuan.txt there are some modprobe options probably to give
the
listed modules a low priority but they are not loaded in Slint case either
so
this should not matter.
To try to understand why sound and speech work in Slint after but not
during
installation in this VM, please send the output of alsa-info from the
installed
Slint in the VM.
Cheers,
Didier
Le 02/06/2023 à 15:16, Pawel Loba a écrit :
Hi,===============================================================================
The first thing I did after being in the slint's installation root
prompt was to have a look at my sound card settings with alsamixer.
Volume for the PCM was low but nothing relevant to the output was
muted. Strangely enough, I went through the whole installation using
my Braille display and as soon as I started Slint after this process,
the sound was there and speakup worked as it supposed to.
So, the lack of sound is only for the installation process.
Thanks,
Pawel
On 6/2/23, Didier Spaier <didier@xxxxxxxx> wrote:
Hi,============================================================================The
Only thing that puzzles me in this output is although the module
snd_ens1371
for
the card be loaded I do not see any output after these two lines:
!!ALSA/HDA dmesg
!!--------------
I tried here (not with the same card) and the output is populated
(presumably
also the output of "dmesg|grep -i -e snd -e alsa")
Other than that, maybe the sound is muted or very low?
Maybe have a look at this thread:
https://answers.launchpad.net/ubuntu/+source/alsa-driver/+question/693397
as it seems to be with the same card and also on VMWare.
Of possible provide the same output from another installer in which
sound
works
in this VM.
I attach the script alsa-info.sh, maybe also available in other
installers
Cheers,
Didier
Le 02/06/2023 à 03:30, Pawel Loba a écrit :
Hi,
Please have a look at the attached file.
Thank you,
Pawel
On 6/1/23, Didier Spaier <didier@xxxxxxxx> wrote:
Hello,
as I do not have Windows to experiment (and never used VMWare 17) I
can
only
suggest that you provide information to investigate this issue.
If possible please type:
alsa-info.sh no-upload --output pawel.txt
and send the file pawel.txt
Aletrnatively you could the --upload and --pastebin options (will use
https://pastebin.ca as remote sever) and give the link to the
pastebin.
Or, proceed to installation and from the installed system send the
file
/var/log/INSTALLER.gz.
Cheers,
Didier
Le 01/06/2023 à 22:14, Pawel Loba a écrit :
Hello,===============================================================================
Just to let you know, there is no speech while attempting Slint 15.4
installation in VMWare 17 running on Windows 10.
There have been already several distribution such as Debian 11,
Devuan
4.0, Accessible Coconut and ArchLinux installed and run in this
environment with no difficulties.
I managed through the initials steps of installation because of my
Braille display.
I made sure that alsa is running and not muted. I executed
/etc/rc.d/rc.espeakup restart with no success.
I am hanging in the installation root prompt in case Didier wants me
to try anything to make it talk.
Thank you,
Pawel
The Slint mailing list.
Archive: https://www.freelists.org/archive/slint
To subscribe or unsubscribe, email slint-request@xxxxxxxxxxxxx with
the
subject
'subscribe' or 'unsubscribe', then answer the email you will receive.
More: email slint-request@xxxxxxxxxxxxx with as subject 'help' or
'commands'.
Slint mailing list.
Archive: https://www.freelists.org/archive/slint
To subscribe or unsubscribe, email slint-request@xxxxxxxxxxxxx with the
subject
'subscribe' or 'unsubscribe', then answer the email you will receive.
More: email slint-request@xxxxxxxxxxxxx with as subject 'help' or
'commands'.
The Slint mailing list.
Archive: https://www.freelists.org/archive/slint
To subscribe or unsubscribe, email slint-request@xxxxxxxxxxxxx with the
subject
'subscribe' or 'unsubscribe', then answer the email you will receive.
More: email slint-request@xxxxxxxxxxxxx with as subject 'help' or
'commands'.
