Dear Dan, the translucent tool window checkbox is unchecked. all the other functions of the script seemed to work normally. Navigation is okay. So far, only the F keys that change keypad templates don't work, and also, pressing the Num keypad keys have no effect at all, and jaws remains silent when I press them. I made sure that num lock was on. Cheers, JPR http://myspace.com/jeanphilipperykiel ----- Original Message ----- From: Dan Rugman To: sib-access@xxxxxxxxxxxxx Sent: Tuesday, March 17, 2009 11:14 PM Subject: [sib-access] Re: the keypad template didn't change correctly The most likely cause for this is that the tool windows are translucent. Open the preferences dialog and make sure that the translucent tool windows checkbox is not checked. Dan Rugman visit the new on-line resource for visually impaired musicians and home of Sibelius Access. www.musicaccess.co.uk -----Original Message----- From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Jean Philippe Sent: 17 March 2009 19:04 To: sibaccess Subject: [sib-access] the keypad template didn't change correctly Dear all, I just change from jaws 8 to jaws 9 and copied all the necessary files for the script to work. Everything seemed okay until I wanted to try and write a little song and discovered that I could not use the function keys for changing the keypad template. I got this message: the keypad template didn't change correctly, the current template is. And that's all. It didn't even tell me what the current template was. Any ideas ? Cheers, JPR http://myspace.com/jeanphilipperykiel If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx