Press AltF3. A dialog containing all the system items appears. Select the item you want and press enter. You will land on the item. Press ENTER again to edit the item. Press escape when you're done editing and the item will be edited. Press tab and you will return to the score in the measure nearest the system item you edited. So, if you have a metronome mark at bar 1 and another at bar 7, selecting the one at bar seven will take you to that mark. Pressing ENTER will put you in the metronome mark's edit field for the purpose of editing. Pressing escape after editing will put you on the highlighted, now edited mark. Pressing tab will put you back in the score in the measure nearest that mark. HTH, Kevin -----Original Message----- From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Vytautas Jr Sent: Saturday, September 06, 2008 4:40 PM To: sib-access@xxxxxxxxxxxxx Subject: [sib-access] removing metronome marks Hi, In Sibelius Access, how would you track metronome marks to remove them so that you can change them? I used to use a sort of find function before, but how would you do that here? Cheers Vytautas Bucionis If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx