Again, I'm not remotely concerned with sibelius playback. I just want to know if the printed symbol I'm looking for exists in one or the other of those two areas. this is a print only issue. On Aug 7, 2012, at 2:18 PM, Dale Lieser wrote: > But you will still need to restate the metronome mark to reset Sibelius' > playback, but just hide it. > > -----Original Message----- > From: sib-access-bounce@xxxxxxxxxxxxx > [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin L Gibbs > Sent: Tuesday, August 07, 2012 3:14 PM > To: sib-access@xxxxxxxxxxxxx > Subject: [sib-access] Re: is "a tempo" a technique or an expression > > Dale, > You don't understand. I put the ritard in from the lines dialog. the issue > is this. I need an a tempo a couple bars later because the original tempo > comes back. the question is, do I use the technique field or the expression > field to restore the original tempo after the ritard ends? > Kevin > On Aug 7, 2012, at 2:12 PM, Dale Lieser wrote: > >> You can either write the word "rit." In the tempo field yourself, or use > one >> of the ritards from the system lines in the Lines dialog, via the letter >> "l". >> >> -----Original Message----- >> From: sib-access-bounce@xxxxxxxxxxxxx >> [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin L Gibbs >> Sent: Tuesday, August 07, 2012 3:09 PM >> To: sib-access@xxxxxxxxxxxxx >> Subject: [sib-access] is "a tempo" a technique or an expression >> >> guys, >> I'm writing a piano piece with a ritard that eventually has an a tempo. >> Does anyone know if that's considered a technique or an expression? I >> didn't notice it in any of the word menus for either techniques or >> expressions. thanks for any help. >> K. >> If you wish to unsubscribe, send a blank message >> with the single word, unsubscribe - in the Subject line to: >> sib-access-request@xxxxxxxxxxxxx >> >> If you wish to unsubscribe, send a blank message >> with the single word, unsubscribe - in the Subject line to: >> sib-access-request@xxxxxxxxxxxxx > > If you wish to unsubscribe, send a blank message > with the single word, unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx > > If you wish to unsubscribe, send a blank message > with the single word, unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx