[sib-access] Re: "Tool windows need fixing" and "open error"
- From: "Duke" <douk.fattah@xxxxxxxxx>
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Thu, 9 Oct 2008 23:20:03 -0000
Ok I understand.
Douk
----- Original Message -----
From: "Vytautas Jr" <vyt.bucionis@xxxxxxxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: Thursday, October 09, 2008 7:05 AM
Subject: [sib-access] Re: "Tool windows need fixing" and "open error"
The keypad window was barely visible on the screen, as I founded out from my
sighted assistant, so it had to be dragged.
Cheers
Vytautas
-----Original Message-----
From: sib-access-bounce@xxxxxxxxxxxxx
[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Duke
Sent: 9 octobre 2008 02:15
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Re: "Tool windows need fixing" and "open error"
What do you mean with repositioning?
Douk
----- Original Message -----
From: "Vytautas Jr" <vyt.bucionis@xxxxxxxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: Wednesday, October 08, 2008 10:39 PM
Subject: [sib-access] Re: "Tool windows need fixing" and "open error"
Thank you. I had to do some repositioning as well.
Cheers
Vytautas
-----Original Message-----
From: sib-access-bounce@xxxxxxxxxxxxx
[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Tim Burgess
Sent: 8 octobre 2008 08:33
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Re: "Tool windows need fixing" and "open error"
Yup, that should do the trick. The key is to leave each window in the open
state.
Best wishes.
Tim Burgess
Raised Bar Ltd
Phone: +44 (0)1827 719822
Don't forget to vote for improved access to music and music technology at
http://www.raisedbar.net/petition.htm
-----Original Message-----
From: sib-access-bounce@xxxxxxxxxxxxx
[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Carlson
Sent: 08 October 2008 05:37
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Re: "Tool windows need fixing" and "open error"
Try opening/closing all three of the properties, keypad, and playback menus
a couple times, then leave in the open position. Then again try fixing the
tool windows. I've had this happen a couple times.
Dave
-----Original Message-----
From: sib-access-bounce@xxxxxxxxxxxxx
[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Vytautas Jr
Sent: Tuesday, October 07, 2008 6:35 PM
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] "Tool windows need fixing" and "open error"
Hi all,
There was already a thread on this, but I am stuck with a bit of a different
situation now. Jaws keeps repeating that the tool windows need fixing. I
fix them, and JAWS says "Open error". A few seconds later there is a
message that says that the properties' window cannot be opened. I open it
with Alt+Control+P, and again "tool windows need fixing" and again the same
response. I reboot, and same thing. How can I get passed this please?
Cheers
Vytautas
If you wish to unsubscribe, send a blank message with the single word,
unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message with the single word,
unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
