Yes, they were. Justin Kauflin http://www.justinkauflin.com 757-630-6329 -------------------------------------------------- From: "Kevin Gibbs" <kevjazz@xxxxxxxxx> Sent: Tuesday, October 06, 2009 10:30 PM To: <sib-access@xxxxxxxxxxxxx> Subject: [sib-access] Re: Help With First and Second Endings > Were the notes read transposed? > > -----Original Message----- > From: sib-access-bounce@xxxxxxxxxxxxx > [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Justin Kauflin > Sent: Tuesday, October 06, 2009 8:30 PM > To: sib-access@xxxxxxxxxxxxx > Subject: [sib-access] Re: Help With First and Second Endings > > > Ok, so that advice worked great. I have one more question now. I press W > and the notation is told to me as if it was extracted. The problem I'm > having now is that the chord symbols are still read to me in concert. Is > there a way to get these to be transposed as well? > To make sure things are clear, I have an alto part, and I want to make > sure > the chords are all read correctly when transposed. Thanks again for your > great feedback. > Justin Kauflin > http://www.justinkauflin.com > 757-630-6329 > > -------------------------------------------------- > From: "Chris Smart" <chris_s@xxxxxxxxxxxx> > Sent: Tuesday, October 06, 2009 1:07 PM > To: <sib-access@xxxxxxxxxxxxx> > Subject: [sib-access] Re: Help With First and Second Endings > >> Hmm interesting. Thanks for posting this; I was still back in Sibelius >> 3 mindset, with it's extract parts dialog. >> >> So, when you go to print things out, you just move through your >> various parts, hitting W, and then you tell Sibelius to print? That's >> it? Neat stuff! >> >> Chris >> >> If you wish to unsubscribe, send a blank message >> with the single word, unsubscribe - in the Subject line to: >> sib-access-request@xxxxxxxxxxxxx >> > If you wish to unsubscribe, send a blank message > with the single word, unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx > > If you wish to unsubscribe, send a blank message > with the single word, unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx > If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx