[sib-access] Re: Help With First and Second Endings
- From: "Kevin Gibbs" <kevjazz@xxxxxxxxx>
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Tue, 6 Oct 2009 11:25:48 -0500
You don't extract parts in Sibelius 4 and forward. You use Dynamic Parts.
When you are on a staff that you want to see as a part, press w.
-----Original Message-----
From: sib-access-bounce@xxxxxxxxxxxxx
[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Justin Kauflin
Sent: Tuesday, October 06, 2009 12:39 AM
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Re: Help With First and Second Endings
Great, thanks so much for that. I knew it was something simple. One other
question, does anyone know where the extract parts option has gone to? It
used to be under the file menu, but I can't seem to locate it. Thanks again
for any help, you guys are great.
Justin Kauflin
http://www.justinkauflin.com
757-630-6329
--------------------------------------------------
From: "Kevin Gibbs" <kevjazz@xxxxxxxxx>
Sent: Tuesday, October 06, 2009 12:48 AM
To: <sib-access@xxxxxxxxxxxxx>
Subject: [sib-access] Re: Help With First and Second Endings
> Presuming that you understand how first and second endings work in
> real life, select the measures you want to be covered by the first
> ending and choose first ending from the lines dialog. Do the same for
> the second ending. To learn more about how to make them play
> correctly, consul the reference guide.
>
>
> -----Original Message-----
> From: sib-access-bounce@xxxxxxxxxxxxx
> [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Justin Kauflin
> Sent: Monday, October 05, 2009 10:44 PM
> To: sib-access@xxxxxxxxxxxxx
> Subject: [sib-access] Help With First and Second Endings
>
>
> Hey guys, I have a really simple question for you. How do you create
> first
> and second ending markings for a leed sheet? Any advice would be greatly
> appreciated.
> Justin kauflin
>
> If you wish to unsubscribe, send a blank message
> with the single word, unsubscribe - in the Subject line to:
> sib-access-request@xxxxxxxxxxxxx
>
> If you wish to unsubscribe, send a blank message
> with the single word, unsubscribe - in the Subject line to:
> sib-access-request@xxxxxxxxxxxxx
>
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
