[SI-LIST] why use oblong pad?
- From: "jagaveer25" <jagaveer25@xxxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Thu, 28 Apr 2005 09:58:20 -0000
hi
i am learning pcb design
usually oblong pad is used in design, i would like to know why
rectangle pad is not used?
or
Difference between oblong pad and Rectangle Pad?
any one tell me plz.........
V.jagaveer
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
