Dear All I have generated a truly differential IBIS .But there are some problem. When I generate the IBIS's rising/falling waveform, I use 50 ohm for R_fix and common mode voltage for V_fix. In the sig-xp, if I use the IBIS to drive a 50 ohm resistor terminated to common mode voltage, the waveform is exactly right .But I must use the IBIS to drive a transmission line without termination. When I use the IBIS to drive a pure transmission line the output waveform's DC level will change and common mode voltage of D+ and D- is different too .How could I generate a truly differential IBIS for pure transmission line network without termination? B.R. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu