Sango, Based on experience Impedance deviation should be minimal... Regards, Aneesh G 2010/11/10 ZYL <sango@xxxxxxx> > Aneesh > > We've already checked with PCB vendor on those proposal, but since we are > working on very small layout area, also thickness can only <0.8mm with > 10layer, right now solution is already the best choice we can select after > balance each team > The risk left for me is we can't realize idea stripline, I want to know how > much impedance deviation might happen for this design > > Br > > Sango > > > At 2010-11-10 16:25:12ï¼?"Aneesh G" <aneesh.govindan@xxxxxxxxx> wrote: > > >Sango, > > Why dont you try swapping Layer 6 with Layer 7? > > Impedance can be achieved in different ways... > >1. By Varying Trace width. > >2. By Varying board Thickness. > >3. By varying Dielectric Material. > > > >Regards > >Aneesh G > > > >On Wed, Nov 10, 2010 at 12:31 PM, ZYL <sango@xxxxxxx> wrote: > > > >> > >> Hello Everyone > >> I got one problem related to PCB layout design for HDMI differential > >> signal. > >> Actualy, since layout area is so limited, we have to route some traces > >> above HDMI differnetial signal in adjacent layer, like below > >> Layer 6: ref. GND; > >> Layer 7: lots digital/power signals (horizental) > >> Layer 8: HDMI differential pairs (vertical) > >> Layer 9: ref. GND > >> Can someone let me know how much impact will get by this kind of routing? > >> Is that possible to meet 100ohm diffenertial impedance by this routing? > >> Thanks > >> Best Regards > >> Sango > >> > >> ________________________________ > >> >Confidentiality Notice. > >> >This message may contain information that is confidential or otherwise > >> protected from disclosure. If you are not the intended recipient, you are > >> hereby notified that any use, disclosure, dissemination, distribution, or > >> copying of this message, or any attachments, is strictly prohibited. If you > >> have received this message in error, please advise the sender by reply > >> e-mail, and delete the message and any attachments. Thank you. > >> > > >> >------------------------------------------------------------------ > >> >To unsubscribe from si-list: > >> >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > >> > > >> >or to administer your membership from a web page, go to: > >> >//www.freelists.org/webpage/si-list > > >> > > >> >For help: > >> >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > >> > > >> > > >> >List technical documents are available at: > >> > http://www.si-list.net > >> > > >> >List archives are viewable at: > >> > //www.freelists.org/archives/si-list > >> > > >> >Old (prior to June 6, 2001) list archives are viewable at: > >> > http://www.qsl.net/wb6tpu > >> > > >> > > >> > >> > >> > >> > >> ------------------------------------------------------------------ > >> To unsubscribe from si-list: > >> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > >> > >> or to administer your membership from a web page, go to: > >> //www.freelists.org/webpage/si-list > >> > >> For help: > >> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > >> > >> > >> List technical documents are available at: > >> http://www.si-list.net > >> > >> List archives are viewable at: > >> //www.freelists.org/archives/si-list > >> > >> Old (prior to June 6, 2001) list archives are viewable at: > >> http://www.qsl.net/wb6tpu > >> > >> > >> > > > > > >-- > >Warm Regards > >Aneesh G > > > > > >------------------------------------------------------------------ > >To unsubscribe from si-list: > >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > > >or to administer your membership from a web page, go to: > >//www.freelists.org/webpage/si-list > > > >For help: > >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > > > >List technical documents are available at: > > http://www.si-list.net > > > >List archives are viewable at: > > //www.freelists.org/archives/si-list > > > >Old (prior to June 6, 2001) list archives are viewable at: > > http://www.qsl.net/wb6tpu > > > > > > > > -- Warm Regards Aneesh G ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu