Sidney, Absolutely. The netlist is nothing more than text that represents the circuit. You can even write the netlist in some other text editor and then copy and paste into the PSPICE netlist. The main idea here is that you save it with a *.cir extension...this is what PSPICE will be looking for. Craig -----Original Message----- From: Sidney S To: gil.gafni@xxxxxxxx; si-list@xxxxxxxxxxxxx Sent: 12/26/2002 9:13 AM Subject: [SI-LIST] simulation Hi all!! Is it possible to write the netlist or import it from another software in pspice format and then do simulation on it.... Please reply... sidney __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu