dear experts, I'm searching for a board-to-board connector for my design. The signals that will connected to the connector are memory interface signals (address,data, control and power signals + GND). The memory that I use is SDRAM, clock speed 50MHz. The connector(s) will be used to have a more PCB area for my design via a piggy-back PCB card mounted on a 3U eurocard. Can you drear expert provide me some vendors or types of connectors that sweatable for this? Because board space is importent, I'm searching for: SMD mounting connector 100 contacts high vibration and shock restistance when plug and receptical are mate! I you know a vendor or a type of connector, please send me some info. many thanks, Nico Nico Fleurinck Junior Design Engineer VERHAERT Satellites & Platforms Hogenakkerhoekstraat 21 B-9150 Kruibeke Tel : +32 3 250.1984 Fax : +32 3 254.1008 e-mail : nico.fleurinck@xxxxxxxxxxxx Visit us : www.verhaert.com ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu