I am having a problem using the s2ibis utility to generate IBIS files from Spice. Below is a description of the problem. The pullup and pulldown curves do not have the power clamp subtracted from them. The ground clamp is however subtracted correctly. This is not OK since pull up and pull down curves should not have the clamp curve in them. I figured this could be something I was doing wrong. So I ran the example tri-statable driver, and it produced the same problem. Has anyone come across this before? Any known patch I can get to fix this? Thank you. Abhijit. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu