Guys, It is much simpler than you may think. Imagine that your driver is an ideal switch, and the transmission line is a Thevenin resistor connecting the driver with the load capacitor. What do you get? A simple RC circuit. Guess what happens when you change the value of the Thevenin resistor? The RC constant changes as well as the slope of the (exponential) curve. The same thing happens with your original circuit. No need for any RF explanation... Arpad Muranyi Intel Coropraiton ========================================================== -----Original Message----- From: Loyer, Jeff W [mailto:jeff.w.loyer@xxxxxxxxx] Sent: Thursday, January 31, 2002 10:10 AM To: 'jleung@xxxxxxxxxxxxxxx'; si Subject: [SI-LIST] Re: rise time performance Well, I kept waiting for someone else to add enlightenment, but I guess everyone else is busy reminiscing about the good 'ol days when college made REAL engineers :-) In the S.I. classes I've attended, I have never heard of this phenomena. I duplicated your results (risetime increasing by merely going through an impedance variation). In retrospect, it might have been predicted (RF folks have been making cool filters out of structures on PCBs for years), but I don't think it's "intuitively obvious to the casual observer". I'm surprised an RF person didn't respond to the question with a clear explanation (hint, hint). Meanwhile, you might want to look at the same simulation in the frequency domain (I did). That same impedance discontinuity has clearly different effects, dependent on frequency. Jeff Loyer -----Original Message----- From: Jason D Leung [mailto:jleung@xxxxxxxxxxxxxxx] Sent: Monday, January 28, 2002 6:08 AM To: si Subject: [SI-LIST] Re: rise time performance Hi all, I have found something interesting while I was doing some simulation and would like to see if there is anyone out there also see this. I have found that using different impedance for a transmission line, I can obtain different rise time at the receiver. Let say I have a simple net with a driver -> 60 ohms tline-> 35 ohm stripline(this is the part I am going to change for the experiment)-> receiver and the rise time for the driver is 0.25ns. For a 35 ohm stripline I can achieve a rise time of 0.4 ns at the output, and if we replace the 35 ohm stripline with a 85 ohm stripline I can achieve a rise time of 0.3 ns at the output. Moreover for a 15 ohm stripline I can achieve a rise time of 0.68 ns at the output. For my limited knowledge I can understand if I have a difference in impedance along the net, I am going to get different overshoot/undershoot since we have a different reflection coefficient, but I am having some probelms in understanding why we can achieve a different rise time with different impedance. Is there any kind soul out there, that can explain this phenomenon to me? thanks in advance Jason Leung ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu