Dear Craig I have found out the mistake in my netlist. It is because I use current source to check the parameter as following: i_noise node1 gnd ac 1 0 r_node node1 gnd cell_c There should be some limit about current source in Hspice. Best Regards Zhangkun 2003.11.11 ----- Original Message ----- From: "Clewell, Craig" <cclewell@xxxxxxxxxxxxxx> To: <zhang_kun@xxxxxxxxxx>; "si-list" <si-list@xxxxxxxxxxxxx> Sent: Monday, November 10, 2003 10:08 PM Subject: [SI-LIST] Re: question about hspice > Zhangkun, > > I don't know if this is a typo, or your a copy of the netlist, but the first > line and last line have different variables. You have eps_nul on the first > line and esp_nul on the last. > > If you run this code and probe V(1000) you will get a peak amplitude of > 1.69E-12 as expected. > > .param esp_nul=8.85e-12 > .param cell_x=7.62e-3 > .param cell_y=10.16e-3 > .param d=406.4e-6 > > .param cell_c='esp_nul*cell_x*cell_y/d' > > vin 1000 0 pulse(0 cell_c 0 100e-12) > rin1 1000 0 50 > > .tran 5e-12 1e-9 > > .END > > Regards, > > Craig > > > > -----Original Message----- > From: Zhangkun [mailto:zhang_kun@xxxxxxxxxx] > Sent: Saturday, November 08, 2003 10:17 PM > To: si-list > Subject: [SI-LIST] question about hspice > > > Dear all > Recently, I meet one problem about hspice. It is described following. > > .param eps_nul=8.85e-12 > .param cell_x=7.62e-3 > .param cell_y=10.16e-3 > .param d=406.4e-6 > > .param cell_c='esp_nul*cell_x*cell_y/d' > > In theory, cell_c should be 1.69e-12. But the result of hspice is 10u. I > guess I miss some setting which define the minimum data. Could anybody tell > me how to set the simulation environment? > > Best Regards > > Zhangkun > 2003.11.09 > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu