[SI-LIST] placement of bias resistors on differential traces
- From: "FROMMANN,NIELS (HP-Cupertino,ex1)" <niels_frommann@xxxxxx>
- To: silist <si-list@xxxxxxxxxxxxx>
- Date: Mon, 3 Feb 2003 17:10:42 -0500
Hello SI-LIST,
if have a question about the placement of bias resistors
on a differential trace:
- does it matter where the resistors are placed along the trace
(beginning, middle or end)?
- should the resistors be placed at the same relative location
so the discontinuity of the resistor pads appear on both traces
at the same time?
Thanks,
Niels.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
- » [SI-LIST] placement of bias resistors on differential traces
