Balamanikandan, Please consult with your Mentor Graphics Technical Support Team with HyperLynx specific questions, or the model maker(s) if the problems are caused by the model(s). Thanks, Arpad ===================================================== -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of Balamanikandan K Sent: Tuesday, March 19, 2013 8:14 AM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] offset in eye mask Hi I use a hyperlynx tool to verify the XAUI interface. When a driver1 is connected to receiver1, the eye diagram is proper. When a driver1 is connected to receiver2 , the eye diagram is OK but there should be a horizontal as well as vertical offset in the eye mask to analyze. How does this shift come? Who causes? Please explain in detail. -- Best Regards, Balamanikandan.K ------------------------------------------------------------------ ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu