Hi all, i need to have analog and digital power supply isolated through a ferrite bead for a DAC circuit.i can give an analog power plane and route the digital supply or a digital power plane and route the analog power or provide planes for both analog and digital in which case areas for both planes will be lesser.i don't have enough pcb area to give a large power plane.can anybody please suggest which will be the best layout and why? thanks, nileena. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu