Hello to all, I would like to analize the timing in the following interface: UC + optocoupler + DAC. The Dac and the uc are connected with SPI. I would like to know which is the highest frecuency for this. My doubt is that when I see the optocoupler timing parameter I find: tplh: propagation delay time to high output level [20,100] and typ. 48 ns tphl: propagation delay time to low output level [25,100] and typ. 50 ns tr: output rise 24ns tf: output fall 10ns pulse with distorsion: typ 3.5ns max 40ns propagation delay skew: tpsk 40ns. So if the clk signal enter to the optocoupler then which parameter should I use for the clk_out delay to risign and delay to falling??. thanks a lot, javi _______________________________________________________________ Yahoo! Messenger Nueva versión: Webcam, voz, y mucho más ¡Gratis! Descárgalo ya desde http://messenger.yahoo.es ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu