[SI-LIST] Re: inrush current
- From: Kevin Rhoads <kevin.g.rhoads@xxxxxxxxxxxxx>
- To: sunil_bharadwaz@xxxxxxxxx
- Date: Tue, 05 Mar 2013 10:24:16 -0500
One bipolar, two diodes and a resistor and you have a fast acting
current limiting circuit -- would that do for a fix?
On 3/5/2013 9:57 AM, sunil bharadwaz wrote:
> Hi All ,
> We are facing in rush current issues in one of our boards .
> The board is rated for about 500 mA .However , it draws
> about 1200 mA for short duration of 40 to 50 usec.
>
> Adding a Load switch at the Power Source input is not
>
> helping much (not as much as required ) .
>
>
> Any thoughts or suggestions are welcome on this issue.
>
> Thanks much in Advance !!
>
> Regards
> Sunil.
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
