[SI-LIST] Re: ibis in hspice
- From: "Ingraham, Andrew" <a.ingraham@xxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Wed, 16 Jul 2003 13:03:36 -0400
> In the first case one way is to use the command print
> print PAR('(v(outputpos)-v(outputneg))')
I think it's simpler than that; all you need to do is:
.print tran V(outputpos,outputneg)
which is standard SPICE syntax.
Also depending on the waveform display program you use, you can usually
derive the differential waveform from the raw node data, using subtraction
in the plotting program.
Regards,
Andy
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
