[SI-LIST] Re: how to simulate with S parameters
- From: "Hassan O. Ali" <hassan@xxxxxxxx>
- To: sam.sim@xxxxxxx, hassan@xxxxxxxx
- Date: Mon, 3 Mar 2003 11:06:17 -0500 (EST)
Sam,
You are right! Sorry for the mistake. However, the S element is also supported
by the
regular HSPICE but only for AC and DC analysis (not transient). That may meet
part of
what was needed.
If you count Spectre as part of the family of "SPICEs", then it is another one
that
supports S-parameter models in transient simulations. I've been using it for
such
simulations for some time now. However, Touchstone, Citifile, etc. formats
cannot be
imported directly - they have to be re-formatted into the "Spectre format".
Thanks for your comments.
Regards.
Hassan.
On Mar 3 , sam.sim@xxxxxxx wrote:
>
>
> Hassan,
>
> I think you had a kind of typo. The S-parameter model is supported only in
> HSPICE-RF and I expect strongly the model will be supported in HSPICE next
> version HSPICE 2003.
>
> The current Spice which can support the simple and seamless import to a
> measured touchstone file is NSPICE of Apache in my experience.
>
> Hope to avoid to confuse SI colleagues.
>
> Sam
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
