The orignal signal may be: To extract S-paramters in a package, which stack up is Top/gnd/vcc/bottom. For one signal trace walk from top to bottom, the port on top layer should refer gnd layer, the other port on bottom layer will refer vcc layer. There are not VCC bypass capacitors on this packge file. Should the port on bottom layer set the refererence to gnd signal also? -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of l Sent: Friday, December 07, 2012 2:20 PM To: Si-List Subject: [SI-LIST] how to set the reference of port in siwave /ÿŠtˆXDüæ{kiËbž©j¶¦z׫¡û"‚v¥–)Þ±ú+¥§$j ÿ!§]<äSjÛazÊ.Çz¹¢©ÿ )ŠÚÛayéݵêæŠv¥ý¶¥—ÿÛºÛaz·Ÿz·§qêejw¨~Ø^²‹«që^®h§jX¬Ðåk'«þØ^çÞéÜz™Z궞Û^®h§jX¬<å„FV²z¿Âjr,zÛazØ^Š³ÎE;h¶¬jg†4?Ó…©ä±©h ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu