The line that you're using to probe the common mode voltage won't work. Take a look at the Simulation and Analysis HSpice documentation for using algebraic expressions. robert Robert Washburn | Senior Hardware Engineer | National Instruments From: <piyush.bhatt@xxxxxxxxx> To: <si-list@xxxxxxxxxxxxx> Date: 10/06/2009 12:52 AM Subject: [SI-LIST] Re: how to plot common mode voltage in Hspice Sent by: si-list-bounce@xxxxxxxxxxxxx Hi We need to do PCI-e gen1 simulations. I extracted s-parameters from allegro. I used that extracted S-parameter for Hspice simulations. I am getting single ended plots and differential plots, but I am not getting plot for common mode voltage. I am using following command in spice files. .tran 5p 30n start=2n .probe tran v(txp_pad,txn_pad) v(rxp_pad,rxn_pad) //for differential plot .probe tran V ((rxp_pad+rxn_pad)/2) // for common mode plot Is there something wrong with spice commands? Please help? I am new to Hspice. Regards Piyush Please do not print this email unless it is absolutely necessary. The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu