[SI-LIST] how to enable VCC voltage levels in Bus switch model
- From: "venkataraos" <venkatarao.S@xxxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Thu, 10 May 2012 22:20:04 +0530
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
Hi all,
I am doing analysis using IDT Bus switch model (Part no idtqs3vh16210).
Once it assign how to enable VCC voltage levels (either 2.5V or 3V3).
Please suggest.
Regards,
Venkat
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
- » [SI-LIST] how to enable VCC voltage levels in Bus switch model - venkataraos
