Hi, experts one question regarding to flight time and propagation delay when using Hspice simulation, In most GUI simulation tool such as candence specctraquest, there's a test load as a reference to measure "flight time" while in Hspice ,there's meas. syntax provied for us to measure propagation delay, I wonder if this propagation delay is as same as the fligth time we measure in GUI tools(specctraquest)??? or.. we still need to add test load circuit into Hspice netlist for simulate the "flight time"?? anyone who please could enlighten me on this issue. thanks a lot! ============================ Stanley Chiu Mitac Corp. S.I. Engineer RD7/HSSD Div. TEL:03-3289000 ext323 ============================ ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu