I admit to not having used digital vectors.... But can't you just use controlled sources(ex: VCVS), to translate from ground-referenced to floating? Andy > i am simulating in Hspice, using this digital vector. it is the simple > way > to define a vector (or vectors) of zeros and ones. the problem is that > it > connects, in the spice netlist, between the node in0 (see file > attached) and > gnd. but sometimes one does not want to connect it to gnd but to > another > node. is there a way to do it? > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu