hi, i am simulating in Hspice, using this digital vector. it is the simple way to define a vector (or vectors) of zeros and ones. the problem is that it connects, in the spice netlist, between the node in0 (see digital vector file below) and gnd. but sometimes one does not want to connect it to gnd but to another node. is there a way to do it? <<digital_pulses.sp>> radix 1 vname in0 io i tunit ns vih 1.5 vil 0 period 4 trise 0.2 tfall 0.2 0 1 0 1 Yonatan (Yoni) Tzafrir *Tel: (972) - 3 - 7552300 (T/L: 351) *Fax: (972) - 3 - 6177130 *Mobile: (972) -54- 459469 *E-mail: <mailto:yonitz@xxxxxxxxxxxxx> -- Binary/unsupported file stripped by Ecartis -- -- Type: application/octet-stream -- File: digital_pulses.sp ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu