Dear all, I have a certain requirement on a component espacially on the power-on ramp of the supply voltages. For the power supply of that component i will use the CPCI 3.3V supply, so my question is: Is there a compact-PCI requirement on the power-on ramp of the supply voltages (12V,-12V,5V and 3.3V)? Many thanks. BRs, Nico Nico Fleurinck Junior Design Engineer VERHAERT Satellites & Platforms Hogenakkerhoekstraat 21 B-9150 Kruibeke Tel : +32 3 250.1984 Fax : +32 3 254.1008 e-mail : nico.fleurinck@xxxxxxxxxxxx Visit us : www.verhaert.com ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu