Doug, Did you remember to instantiate the external pull-up resistors in your model? If they are missing, your driver will be stuck at constant 0V just like the error message reports. Regards, Steve. At 05:32 AM 4/1/2003 -0500, SI Eng wrote: >Gurus : > >I'm trying to simulate a heavily loaded I2C bus (2 wire serial bus) with a >mixture of I2C and non I2C input devices on it. I can't get XTK to >correctly translate the IBIS model of the I2C I/O - I think there's some >input filtering and spike suppression circuitry on the I/O that it doen't >like. When I run ibis2xtk, the resulting XTK model gives erroneous results >when I try using it. The log file states the following problems : > >INFO: Removing constant voltage segment at 0V [1] > >ERROR: Constant voltage segments (Removed 1) found in GND_Clamp curve > >Any ideas ? The IBIS model in question is the Philips PCA9556. > >Thanks, > > Douglas > > > > > >--------------------------------- >Post your free ad now! Yahoo! Canada Personals > > >------------------------------------------------------------------ >To unsubscribe from si-list: >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > >or to administer your membership from a web page, go to: >//www.freelists.org/webpage/si-list > >For help: >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > >List archives are viewable at: > //www.freelists.org/archives/si-list >or at our remote archives: > http://groups.yahoo.com/group/si-list/messages >Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu