Hi Balamanikandan, You may first review the XAUI electrical specification in relevant clause of IEEE802.3 , include transmitter, receiver and test PRBS pattern. It always look from my iPhone 在 2013-1-19,19:30,Balamanikandan K <kbmanick@xxxxxxxxx> 写道: > Hi, > How to analyze signal integrity of the XAUI interface using ibis models? > Please share me if you have any good tutorial and simulation set up using > PRBS pattern. > > > > -- > Best Regards, > Balamanikandan.K > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List forum is accessible at: > http://tech.groups.yahoo.com/group/si-list > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu