> Unable to understand the need for this, as what i understand is wander is a > low frequency jitter and it is tracked by the CDR in Rx. If the wander is a slowly varying input offset voltage, the effect of it is to push one edge in one direction, and the other edge the other way. The result is very quick timing jitter, and the CDR can't track that. Regards, Andy ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu