[SI-LIST] Via inside SMD discrete
- From: Naren Thesia <naren.thesia@xxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Fri, 9 Dec 2005 22:01:27 +0530
Hi All,
My question is related to general PCB discussion.
Recently I saw via between the component pad for SMD decap (As shown in
attached screen shot). I got clarification that it is to improve the
performance of decap in High speed design!
I unable to understand that clearly. Any one can share his or her
experience?
Thanks in advance
-- Binary/unsupported file stripped by Ecartis --
-- Type: image/jpeg
-- File: Capacitor.jpg
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
