[SI-LIST] Re: VOH(DC) value in JEDEC DDR4 Spec

  • From: Hermann Ruckerbauer <Hermann.Ruckerbauer@xxxxxxxxxxxxx>
  • To: si-list@xxxxxxxxxxxxx, "Nichenametla, Raghavendra Gupta" <raghavendra.gupta.nichenametla@xxxxxxxxx>
  • Date: Fri, 18 Sep 2020 15:19:08 +0200

Hello,

this value is often missunderstood..
in DDR3 the Voh/l have been some levels that the DRAM woudl Drive out.
in DDR4 the Voh/l levels are voltages that are forced externally and the
current is measured in order to characterize the output driver linearity.

So if your compliance app measures a level there .. just disable this
measurement..
Basically most "Read" measurements that are done in the compliance app
are useless for a system characterizaiton. These are Data output tests
and need to be done on special testboards by the DRAM vendors (and even
in this environement it is impossible to execute the measurement correct).
So for Reads you are on your own anyhow!

Hermann

-- 
EKH - EyeKnowHow 
Signal Quality - Made in Bavaria
Hermann Ruckerbauer
www.EyeKnowHow.de
Hermann.Ruckerbauer@xxxxxxxxxxxxx
Itzlinger Strasse 21a
94469 Deggendorf
Tel.:   +49 (0)991 / 29 69 29 05
Mobile: +49 (0)176  / 787 787 77
Fax:    +49 (0)3212 / 121 9008

Am 18.09.2020 um 14:31 schrieb Nichenametla, Raghavendra Gupta:

HI Experts,
I have a question w.r.t. the VOH(DC) for Data lines in DDR4 JEDEC specs. In 
the spec its specified nominal value as 1.1*VDD(i.e 1.32V if VDD=1.2V) . 
Does the spec is wrong or it’s a maximum value? How can we get 1.32V if we 
supply 1.2V


Thanks in advance.
Regards,
Raghavendra
Systems Engineer.
Intel Deutschland GmbH
Registered Address: Am Campeon 10-12, 85579 Neubiberg, Germany
Tel: +49 89 99 8853-0, www.intel.de
Managing Directors: Christin Eisenschmid, Gary Kershaw
Chairperson of the Supervisory Board: Nicole Lau
Registered Office: Munich
Commercial Register: Amtsgericht Muenchen HRB 186928
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List forum  is accessible at:
               http://tech.groups.yahoo.com/group/si-list

List archives are viewable at:     
              //www.freelists.org/archives/si-list
 
Old (prior to June 6, 2001) list archives are viewable at:
              http://www.qsl.net/wb6tpu
  


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List forum  is accessible at:
               http://tech.groups.yahoo.com/group/si-list

List archives are viewable at:     
                //www.freelists.org/archives/si-list
 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: