[SI-LIST] VME Termination

From: "Havermann, Gert" <Gert.Havermann@xxxxxxxxxxx>
To: si-list@xxxxxxxxxxxxx
Date: Fri, 5 Feb 2010 04:36:07 +0100

Dear Experts,
Does anyone of you happen to know electrical details of the dual
Termination scheme?
I'd like to change to higher resistor values for power saving, but I
don't know how it will affect the signal integrity of my backplane.

Some details:
VME: Vth = 2.94V, Rth = 194ohms. We will keep the equivalente voltage,
but we will increase the equivalent resistance; for example, Vth 2.94V, Rth = 
600ohms.

Any comment is appreciated.

BR
Gert

--------------------------------------------------------------------------
Absender ist HARTING Electronics GmbH & Co. KG; Sitz der Gesellschaft: 
Espelkamp; Registergericht: Bad Oeynhausen; Register-Nr.: HRA 5596; persÃ¶nlich 
haftende Gesellschafterin: HARTING Electronics Management GmbH; Sitz der 
KomplementÃ¤r-GmbH: Espelkamp; Registergericht der KomplementÃ¤r-GmbH: Bad 
Oeynhausen; Register-Nr. der KomplementÃ¤r-GmbH: HRB 8808; GeschÃ¤ftsfÃ¼hrer: 
Torsten Ratzmann


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                //www.freelists.org/archives/si-list
 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

[SI-LIST] VME Termination

Other related posts: