[SI-LIST] Re: Use of package model in SPECCTRAQuest
- From: Ravinder.Ajmani@xxxxxxxx
- To: kwillis@xxxxxxxxxxx
- Date: Fri, 15 Aug 2003 16:22:39 -0700
Ken,
Thanks a lot for your tip. Also thanks to all of you who responded. After
I ran ibis2signoise to translate the .ibs and .pkg models, the .dml files
were generated for both the models, and Device model had a reference to
the Package model. Only, it didn't show up as pin parasitic in the pin
data. As you indicated in your note, I was able to see the package model
in the subcircuit, when I simulated the net in SigXp.
Regards, Ravinder
Server PCB and Flex Development
Hitachi Global Storage Technologies
Email: Ravinder.Ajmani@xxxxxxxx
"Ken Willis" <kwillis@xxxxxxxxxxx>
Sent by: si-list-bounce@xxxxxxxxxxxxx
08/15/2003 05:42 AM
Please respond to kwillis
To: <Ravinder.Ajmani@xxxxxxxx>, <si-list@xxxxxxxxxxxxx>
cc:
From: si-list-bounce@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: Use of package model in SPECCTRAQuest
Hi,
If the device-level IbisDevice model calls out the PackageModel,
and finds it in the library, then it will get used in the
simulation. If you want to double-check, you can run a sim in
SigXp, and go look at the spice file it generated in the
latest sigxp.run\case#\sim#\comps.spc file. You should see the
subcircuit in there.
Ken
-----Original Message-----
From: Ravinder.Ajmani@xxxxxxxx [mailto:Ravinder.Ajmani@xxxxxxxx]=20
Sent: Wednesday, August 13, 2003 5:50 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Use of package model in SPECCTRAQuest
Hi SI experts,
A vendor has sent me a separate package model along with the IBIS model. =
When I converted the .ibs file to .dml file for SPECCTRAQuest, it =
inserted=20
the name of package model in the .dml model, but there was no package=20
model to be seen in the model library. Later, I translated the .pkg =
file=20
to another .dml file and now I can see the package model in the model=20
library with the same name contained in the buffer .dml file. However, =
I=20
am not sure if SPECCTRAQuest will use this package model during run =
time,=20
because the .dml file for buffer model still does not show any pin info. =
Am I doing something wrong here.
I will very much appreciate your help in this matter.=20
Regards, Ravinder
Server PCB and Flex Development
Hitachi Global Storage Technologies
Email: Ravinder.Ajmani@xxxxxxxx
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to: =
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at: =20
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages=20
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
=20
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
