[SI-LIST] UltraCAD's ESR Calculator Upgrade
- From: Doug Brooks <doug@xxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Fri, 23 Jan 2004 11:45:33 -0800
UltraCAD has just upgraded its ESR Bypass Cap calculator to Version 3.2
Previous licenses are fully compatible with this new release.
This revision is direct result of user input and requests.
The most significant improvement is a more flexible input data format,
allowing optional comment fields and zero-quantity data records for easier
evaluations of multiple sets of data.
Other improvements are a more flexible print output capability and the
ability to put any arbitrary reference line as a target impedance on each
output graph.
Doug brooks
Doug Brooks' new book, "Signal Integrity Issues and Printed Circuit Board
Design" has just been released by Prentice Hall. See details and ordering
info at www.ultracad.com
______________________________________________________________________________
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
- » [SI-LIST] UltraCAD's ESR Calculator Upgrade
